What should I do if the washing machine gets into water slowly?

Upgrading your appliances can rejuvenate not only your home’s aesthetics but also its functionality. At QG Appliances 4 Less Springdale, we provide an extensive selection of open box, scratch, and dented appliances that offer both quality and value. Serving not just Springdale but also nearby cities like Fayetteville, Rogers, Bentonville, and Lowell.

Washing Machine as a daily housework right-hand man, once the water into the slow situation, like the car broke down on the way, let a person dry anxious but no way, seriously affect the rhythm of life. Don't panic, here is a super practical limit strategy to help you quickly check and solve the problem of slow water into the washing machine.

1、Water sources and taps

(1).Insufficient water pressure in water source

Low water pressure, like poor blood flow in the veins, can make it difficult for washing machines to get water. You can look at other water-using equipment in your home, such as kitchen faucets and bathroom showers. If they also significantly reduced the amount of water, it is likely that the entire residential water pressure is low.

Solution: contact the property or local water company immediately to find out if there is a regional water pressure problem. If the water pressure problem can not be solved in a short period of time, you can consider installing a booster pump to give water flow power, so that the washing machine can smoothly into the water.

(2).The tap is not fully turned on

The faucet is not open to the full, just like the door is only open a crack, the flow of water is naturally limited.

Solution: directly turn the tap to the maximum open state, simple and direct operation, let the water flow out smoothly.

(3) .The inside of the tap is blocked

After long-term use, the inside of the faucet may accumulate scale, impurities, like sewage is blocked by garbage.

Solution: first turn off the water, unplug the Washing Machine Power Plug, to ensure safe operation. Locate the inlet valve strainer and carefully remove the faucet. Use a small brush or fine wire to remove internal dirt and unclog clogged pipes. Clean Up, re-install the tap, open the water and power, check whether the water back to normal.

2、Inlet valve strainer

The water inlet valve filter screen is the goal keeper of the washing machine, intercepting impurities in the water, but over time will be blocked, affecting the water inlet.

(1) .Remove the strainer

Turn off the water, unplug the plug, locate the inlet valve strainer, and carefully remove it.

(2).Clean the strainer

Preliminary washing: wash the surface of the filter screen with clean water large particles of impurities, first to the filter screen simple washing, remove obvious dirt.

Deep scrub: for stubborn dirt, with a soft brush dipped in a small amount of detergent, gently scrub the filter, the action should be gentle, as to do maintenance of precious items.

Rinse thoroughly: after cleaning, rinse thoroughly with water to ensure no residual dirt and dust off the soldiers.

(3).Reinstall

Install the clean filter back to the original position, ensure the installation is firm, let the Water Inlet channel again unblocked.

3、Inlet hoses

(1).The hose is compressed or twisted

The intake hose is squashed or twisted, as if the road were weighed down or twisted, affecting the flow of water.

Solution: check the hose carefully for compressions or kinks. Quickly adjust the hose position to allow it to stretch naturally and straighten out the kinked path.

(2).The inside of the hose is blocked

Dirt builds up inside the hose as if the pipe were rusted and clogged.

Solution: remove both ends of the hose, with a slender hose or ventilation pipe connected to one end of the tap, the other end into the hose, open the tap, use the water flow out of the dirt, with high-pressure water gun to flush the pipe. If the dirt stubborn, can use the right amount of detergent immersion cleaning, but after cleaning must be fully rinsed with water, to the pipeline after a bath dry body.

4、The water solenoid valve

Water Inlet solenoid valve is the commander of the control of washing machine water, failure will lead to slow or unable to enter the water.

(1).Sound judgement

When the washing machine starts the water inlet process, listen close to the water inlet solenoid valve. If you can hear a slight buzz, solenoid valve has been electrified, but may be blocked or valve core stuck.

Solution: gently tap the solenoid valve to loosen up the stuck machine and see if it works again.

(2).Silent judgment

If you can not hear any sound, it is likely that the solenoid valve coil burned or circuit failure.

Solution: need to replace the new inlet solenoid valve. When you buy to pay attention to the selection and washing machine model matching solenoid valve, to the car to choose the right parts. When replacing, turn off the water and power first, follow the instructions, or ask professional maintenance personnel to help ensure that the replacement is safe and correct.

5、Programs and patterns

Sometimes, washing machine water slow is caused by improper operation, like driving the wrong car gear affect driving speed.

(1) .Check the washing procedure

Different washing procedures have different requirements for water intake speed. For example, the soft washing mode has slow water intake and is suitable for delicate clothes, while the fast washing mode has fast water intake and high efficiency.

Solution: carefully check the washing machine display, confirm whether the current program meets the requirements. If you choose the wrong program, re-select the appropriate program can be in the navigation to reset the destination.

(2) .Adjust the setting of water level

Some washing machines have a water level adjustment function, the water level is set too low will lead to prolonged water intake time.

Solution: according to the number of clothes and dirty degree, reasonable adjustment of water level. More clothes, dirty heavy, on the high water level; clothes, less clean, on the low water level, according to the amount of food adjustment.

Conclusion

Although the washing machine water slow problem is a headache, but as long as in accordance with this super practical limit strategy, step by step to investigate and solve, can let the washing machine again smooth water, continue to serve our life. I hope this guide will help you cope with slow water flow into your washing machine and make housework easier!